Page 26 - Brewers Catalogue 2024

Topside Finishes

Brightside Polyurethane

Brightside polyurethane is the most technically advanced one-part polyurethane available. Brightside now
contains Teflon for better resistance to staining and abrasion. Brightside uses polyflow 4000, a unique
polyurethane resin, which yields excellent flow and levelling characteristics as well as incredible abrasion
and chemical resistance. Specially formulated to resist UV damage, this one part polyurethane
gives the look of a two part polyurethane with the application ease of a one part enamel.
Primers - 4279Q -pre-kote white
4100Q - Largo Blue 4250Q - Steel Gray
4279G -pre-kote white
4152Q - Yellow 4253Q - Ocean Blue
4190Q - Kingston Gray 4258Q - Black 4280Q -pre-kote gray
4205Q - Seattle Gray 4259G - Blue Glo White Solvents - Brushing - 333Q
for
4207Q - Bristol Beige 4259Q - Blue Glo White Spraying - 216Q
colours see
4208Q - Hatteras Off White 4316Q - Dark Blue
colour chart Clean-up - 216Q
4217Q - Grand Banks Beige 4351Q - Light Blue
Additives - Flattening Agent - 715Q
4218Q - Hatteras Off White 1990 4353Q - Medium Blue
Non-skid - 2398P
4237Q - Sundown Buff 4359G - White
4241Q - Sapphire Blue 4359Q - White
4247Q - Sea Green 4360Q - Matterhorn White
4248Q - Fire Red 4381Q - Off White
4990Q - Flag Blue
Boot Stripe Paints Bilgekote Interdeck
Perfect for striping and accenting A fast drying, durable coating formulated for A tough polyurethane, low sheen coating
application to bilge areas that helps prevent that provides an excellent slip resistant finish.
4359P - White absorption of oil, gas or sludge It contains a fine aggregate that
into wood or applies easily on all substrates.
fiberglass. 000Q - White
YMA100Q - Gray 009Q - Sand Beige
YMA102Q - White 684Q - Gray

Flattening Agent Non-Skid
Paint Additives Takes the gloss out of Add to topside paints
Interlux one part topside for traction on high
finishes.
traffic areas.
715Q 2398P
Fiberglass Surface Prep Prekote primer for single part topside paints
A mold release agent remover used to thor- Designed for use with any one-part topside finish.
oughly clean gelcoat prior to painting. The Microspheres give this primer superior build and
use of 601 to remove surface contaminants is hide while improving flow and sandability. For use
extremely important if the full adhesive quali- anywhere above the true waterline where a smooth
ties of the topcoat are to be realized. fair surface for overcoating is required.
601Q 4279Q - White 4279G - White
4280Q - Gray

Epoxy Primekote White Primocon - Underwater Metal Primer
This multi-purpose Primer is an excellent under- for Antifouling
coater for use above or below the waterline. Single package, non-bleeding anti-corrosive
Can be safely applied over fiberglass, steel, cast Primer for underwater metal surfaces.
iron, lead and clear epoxy. Quart kit Compatible with most antifouling paints.
404/414 984Q
984G

email:info@brewersmarine.com
email:info@br ewersmarine.com 5 5