Page 328 - Brewers_Catalogue_2025

Shaft Packing

Tefpack shaft packing is constructed from strong synthetic PTFE Flax packing is braided from quality flax rovings
yarn that is impregnated with TEFLON (PTFE). This blend which are then impregnated with TEFLON (PTFE). The result
delivers a packing that is not only very strong and durable, but is a quality packing that offers high performance and extended
is not subject to the mildew/rot packing life.
cycle found in natural fibers.

3/16” - 10016
3/16” - 10031
1/4” - 10017
1/4” - 10032
5/16” - 10018
5/16” - 10033
3/8” - 10019
3/8” - 10034

1/2” - 10036

Shaft Packing - Ultra X Packing Graphtex Ultra shaft packing is a blend of WL Gore fibers and
over five times more thermally conductive graphite fibers, impregnated with PTFE. It is very strong, durable and
than flax and PTFE. Self lubricating and issipates heat away from the stuffing box. 1 ft package.
conformable, easy to install, stays pliable,
never hardens or becomes abrasive even at
high speeds. Sold by the 1lb box 100240 1/8”
UX0250-01 1/4” (20ft) 100241 3/16”
100242 1/4”
UX0375-01 3/8” (9.5ft)
100243 5/16”
UX0500-01 1/2” (5ft)
100244 3/8”
UX0625-03 5/8” (9.6ft)

Shaft Packing: A medium hard, lubricated packing, rot 10146 - Dripless Moldable Packing Kit
resistant, good for cold water, brine and cold oils. Rated at Starter kit will pack up to 1-1/2” shaft. The economical answer
200F(94C), 1200FPM to leaking stuffing boxes as well as leaking rudder stuffing
3/16 2138316 40ft
Sold in 1 lb boxes boxes. A combination of teflon packing and paste, forms a
1/4 213814 27ft
perfect self lubricating seal within the
5/16 2138516 20ft
stuffing box to keep water out. Standard
3/8 213838 12ft
shaft packing us used as a retainer (not
1/2 213812 8ft
included) Consult the perfomance
5/8 213858 4ft
formula to ensure this product will work
3/16 21383161 within performance limits of the shaft
Sold in 1/4 2138141 being repaired! (see below)
2ft lengths 5/16 21385161
3/8 2138381 The dripless kit requires two rings of standard shaft packing
1/2 2138121 to act as a retainer for the drip less
moldable packing. This standard shaft
packing is not included.
Syntef Shaft Packing Lubricant
10150 Formula: Shaft size x 3 x maximum shaft rotation speed
plastic squeeze tube for easy application! (not engine, but shaft rotation) divided by 12. If the answer
is less than 900 the boat is within the kit’s performance
limits. If the number is more than 900 the kit should not be
used.

306 Phone: 1-800-263-8328