Page 364 - Brewers Catalogue 2024

NEW for 2024! Barton

SkyLock Blocks feature 316 stainless steel side plates, glass
reinforced nylon cover plates and internal self-locking aluminium cam B52000(grey)
to lift and lock loads securely. The clever design and construction of B52001(white)
the locking cams means the control line will never allow loads to drop
even when accidentally released. Designed for use in conjunction with 3:1 or 4:1 pur- Line Tamer
chase systems. Can be used for commercial and leisure marine operations including a
davithoist system to lift dinghies, outboards, provisions and equipment on board, espe-
cially useful when short handed. Lift up to 175lbs up to 13ft!

BN09411 - 3:1
BN09421 - 4:1
81581 - Organiser
Mast Base Organizer QUICK CLEATS
B43605 B81550 pair! 1/4” line B60020
Tiller Extension The unit is fitted close to the mast base to for inflatables! 1/4” line B60021
Clip accept halyards, reefing lines and topping lift black! 5/16” line B60030
and is designed to work in conjunction with
white! 5/16” line B60031
our range of deck organisers, rope clutches and
winches, doing away with the need to leave the Stainless!3/8” line B60040
B70300 cockpitwhen reefing, hoisting or lowering the Are you looking for a secure
mainsail
Kevlar Cam alternative for traditional cleats that are
Cleat specifically designed for kayaks, water
toys, paddleboards, tender lines, Ribs,
2” centres,
fenders and tarpaulins!!
max line 9/16”

Dinghy Mast Support
uses existing transom
fittings to support the mast
during travel and storage! blocks not included, use BN05090

(for line up to 7/16”)
B42300

Clamseal
Emergency inflatable boat repairThe award winning, patented ClamSeal™ repairs inflatables fast - even when
wet. The ClamSeal™ can instantly repair splits and tears up to 90mm (3½”) in lengthwithout the use of any
hand tools or adhesive. ClamSeal™ is a patented glue-less repair system that instantly repairs small tearsor
splits in inflatables above or below the waterline - regardless of the fact that the material may be wet
B60001

Low Friction Eyes
Low Friction Eyes with Dyneema Loop
high load, low friction!
1/8” line with approx 4” loop - B60460
1/8” line with approx 9” loop -B60461
1/8” line, 1/4”bore - B60449
1/8” line, 3/8” bore - B60450 1/4” line with approx 12” loop - B60462
1/4” line, 7/16” bore - B60451
3/8” line, 5/8” bore - B60452
7/16” line, 7/8” bore - B60453
5/8” line, 1-1/8” bore - B60454

email:info@brewersmarine.com
343