Page 498 - Brewers_Catalogue_2025

Battery Isolators

Galvanic Isolators
The ProSafe FS Series Galvanic Isolators will interrupt galvanic current flow with other boats at a
marina when installed on a boat which is connected to AC Shore Power. This technology
maintains AC safety ground and solves the most common forms of corrosion and premature zinc
loss within a boats bonding system. 120/240 VAC, 50 or 60 Hz
22034 30 amp 6.75x7x2.5”
22074 50/60 amp 7.25x6.5x3.75”
4531011 50/60 amp Guest Galvanic Islolator

ProlsoCharge Series Intelligent Isolation and Charging Software Control. Real Time LED Status
Indicators. Ignition Controlled- Distributed on Demand battery bank management will only activate
with ignition power on. Easy Installation - Modular design for easy install. Includes all terminal stud
insulator boots and protective snap on safety cover. All units are 5.875”W x 3.125”H

23121 12V 120 Amp 1 ALT 2 Batt 5.35” L
23122 12 180 1 2 6.18”
23123 12 250 1 2 6.95”
23124 12 120 1 3 6.15
23125 12 180 1 3 7.55”
23126 12 250 1 3 8.875”
23127 12 130 2 4 12.05”

130A Battery Isolator
1 Alernator / 2 Battery isolators gold-plated terminals and improved efficiency, provide
enhanced charging.Rated for use with DC devices ranging from
10 amps to 130 amps. 1-130-2

DynaPlates
- improves performance of electronics, reduced RF interference Item # Dimensions
- helps provide a direct, low resistance path
for lightning protection. deters severe elect. 4006 6” x 2” x 1/2”
and galvanic corrosion problems. 4008 8” x 2-1/2” x 1/2”

4012 12” x 3” x 1/2”
4018 18” x 6” x 1/2”

476 Phone: 1-800-263-8328