Page 353 - Brewers Catalogue 2024

Rigging Fittings

STAY EXTENDERS
These stainless steel plates are designed for extending short stays, or to replace a turnbuckle.
Several of these are a must for the ship’s Kit. (Sold in sets of two, two pins with split rings included.)
Catalogue # Pin Dia. Max Pin to Pin
16-204 1/4” 3-3/4”
16-205 5/16” 4-3/8”
16-206 3/8” 5”
16-208 1/2” 5-5/8”
16-210 5/8” 6-7/8”
16-212 1.5mm 104mm
16-213 1.5mm 160mm
16-214 2mm 165mm
16-217 1.5mm 100mm

ADAPTER LINK PLATES
These very useful links come in pairs and will allow you to
convert an eye to a jaw or a jaw to an eye. Must be used in pairs. Pins not included.
Catalogue# Pin Diameter L T
52-124 5/16” 15/16” .185”
52-125 3/8” 1-1/8” .250”
52-126 1/2” 1-5/16” .280”
52-126-1 3/8”-1/2” 1-5/16” .280”
52-127 5/8” 1-5/8” .370”

SHROUD ADJUSTERS - CALIBRATED
These stainless steel adjusters provide 16 possibilities of quick
adjustment. Pins and split rings included.

Catalogue # Total Adj. Increment Pin Dia. Upper- Jaw Width
15-204-1 2-1/2” 5/32” 3/16” -1/4” 3/8”
16-215 120mm 1.2mm 36mm
16-216 120mm 2mm 36mm

QUICK RELEASE LEVER CALIBRATED QUICK
Extensively tested on both high performance RELEASE LEVER
multihulls and monohulls, this rugged fitting
has an ultimate strength of 3500 lbs. Special
Developed for dry sailed one-design
design allows it to be opened and closed
dinghies. When the quick release pin is
safely while under load. Lever takeup is 2-
pulled, easy adjustment and unrigging
1/8” to an over-center position and comes with
can be obtained.
a quick release pin for positive locking. This
is an essential piece of hardware for trailerable
boats up to 26 ft. A lever on the forestay
greatly facilitates stepping and unstepping the
mast.

Extender # Q.R
Cat # Wire Dia. Pin Dia. Max Adj. Pin to Pin
of holes Throw
14-205 3 to 1/8” 1/4” 1” 2-1/4” 7-3/8” min Wire Chainplate Max wire Pin to pin
8-3/8” max Cat #
terminal pin pin size adjustment
14-206 4 to 5/32” ext. 5/16” 1-1/2” 2-1/4” 6-7/8” min 1-3/4” -
chainplate 1/4” 8-3/8” max 15-212 3/16” 1/4” 1/8”
3-5/8”
332 Phone: 1-800-263-8328